Ghost 2 Immobiliser
Ghost is an electronic security system that wirelessly safeguards your car from key-cloning and hacking. It connects to the ECU unit via the CAN data network. It's quiet and can't be recognized by thieves.
You can only disarm it by pressing an appropriate button sequence (like PIN code) you have programmed into your car using buttons on the steering wheel and the centre console.
Guard Your Car from Theft
Car theft is on the rise, and vehicles are taken away in just seconds. It is essential that car owners think about the additional security measures they can take. An immobiliser is one of the best and most well-established methods to protect your vehicle. Ghost immobilisers are a great choice as they are small and concealed within the vehicle's wires. They also don't emit radio frequency signals. This means that they are untraceable and can be installed without affecting your vehicle's CAN bus.
Unlike other immobilisers that rely on tags, keypad input or a specific sequence of keys to disable them the ghost immobiliser that is located near me is only disabled with the exact pin code that was set up by us at the time of installation. This unique disarm sequence uses the buttons already present within your vehicle, such as those on the steering wheel, doors, or the centre console to stop anyone from starting the engine and driving your car away. This makes it impossible for thieves to copy your key or use jamming/spoofing devices that can disable standard immobilisers.
A ghost immobiliser won't only stop your vehicle from being driven but also stops it from being smashed to make parts. This is a growing issue in the UK due to the growing popularity of these kinds of automobiles. It can happen in less than one minute. Ghost immobilisers from TTW are easily programmed to shield your vehicle from these types of attacks.
If you have our Ghost 2 immobiliser installed near me it will stop your vehicle from being stolen from a service station or even in the event that it is driven by an employee while your car is on the lift at the garage. This is because the Ghost can be set to Service/Valet mode only and allow a unique button sequence to be entered by our customers, you.
If you would like to learn more about our ghost immobilisers or need a free quote, contact us today. We're happy to assist you and give you peace of mind knowing that your vehicle will be protected at all time.
No LED or key fobs to indicate its location
This car immobiliser that is not detectable integrates with your cars CAN network to protect your vehicle from the newest kind of car theft. Ghost is distinct from other aftermarket CAN-immobilisers that depend on LED indicators or key fobs to perform the function. Instead, it makes use of the buttons on your vehicle's standard factory controls, including those on the steering wheel and doors. This creates a hidden code that needs to be entered in order to start your vehicle, which makes it difficult for thieves to track.
The developers of the CAN-BUS immobiliser have also added extra high-security methods to protect the device from being hacked or bypassed. It also provides CAN-BUS blockage and a physical immobiliser cut, which means that even if your keys get stolen, the criminal cannot drive away with your joy and pride.
It's easy to install the CAN BUS immobiliser in your vehicle. It only takes around 30 minutes. We will have a member of our team in your area to arrange a time and location that suits you. Once your vehicle is fitted, you will receive an registration number and unique security codes for your mobile and the app to make it simple to use and ensure you are always in control of your vehicle's security.
The system is compatible with most modern vehicles, but If you own a classic or specialized vehicle we recommend you contact us to check compatibility. The Ghost Immobiliser 2, including installation, costs APS449; your car will also be added to the International Security Register if installed by one of our approved installers. Don't be afraid to contact our helpful team if you have any queries. We're looking forward to hearing from you.
Easy to Setup and Program
Immobilisers are fitted to many modern vehicles to prevent theft or hot-wiring. Immobilisers are more effective than physical deterrents such as wheel locks and steering wheel clamps because they are built into your vehicle.
The system connects directly to the CAN data network of your vehicle and prevents the vehicle from starting until you input a unique personalised code. The device is compact and sealed, meaning it can be installed anywhere within your vehicle without any additional wiring. It also doesn't emit a radio frequency signal which means it can't be detected by RF scanning or code grabbing devices used by thieves.
Ghost uses your vehicle's existing buttons on the steering wheel, door panels and centre console to create a customised disarm sequence (like the PIN code) that must be entered to authorise startup of your vehicle. The pin code sequence is built around four to 21 button presses and is easily changeable when required. You can even put your vehicle into Service/Valet mode, so that it can be operated, but the vehicle will not start and drive. This will ensure that your car is safe when you bring it to the mechanic for valet parking or service, and that the mechanic can't access your pin code to turn off your system.
You can use our app to set an interim pin for your ghost device if you're planning to be away from your vehicle for a prolonged period of time such as an extended work or holiday. You can also enter your pin code manually when you are planning to drive the vehicle.
Our CAN bus immobiliser is also compatible with a remote keyfob as well as a tracker. (Brand dependent) This gives priority to the ghost system. This will give you extra security if your vehicle is stolen or if keys are lost.
If you're seeking a way to safeguard your vehicle from key cloning and hacking, call us now to find out how we can assist. We offer our services throughout the UK and in our dedicated installation centre in Derby.
Service/Valet Mode
Modern cars are equipped with sophisticated eco systems with stop/start functions that require the correct inputs for them to work effectively. For example, battery voltage and temperatures of the engine, as well as external temperatures, and which electrical systems are active. They can cause issues, and it can be difficult to determine if the problem is Ghost-related or not. This is particularly true if the vehicle has been recently serviced or valet parked. If ghost immobiliser cost is the case you can go into the ghost service mode allowing the vehicle to start and drive without the need for a pin. This can be useful for the time that your car is being serviced or valet parking at an independent garage.
To enter service mode, press the service button five times. The indicator light will flash twice to signal that service mode is entered. You can exit the mode at any point by entering a PIN number. Once you have exited service mode the Ghost immobiliser will go back to normal operation.
It is a discrete system that communicates with the vehicle ECU via the CAN data circuit. It is directly connected to the original buttons of the vehicle and does not employ radio frequency signals, as do other immobilisers. This makes it nearly impossible for any other device or hacker to bypass the system. Even devices that use spoof codes from an original key fob won't affect this.
It is a TASSA tested anti-theft device that meets the highest standards of security. It has a unique marking system that is linked to the international security registry which is a requirement for insurance companies.
The ghost immobiliser is a small device that can be easily concealed in the wiring of your vehicle's factory. This makes it virtually impossible for thieves to steal. The sealed unit is so small that it can be positioned in a variety of places around the car, such as under dashboards or on the steering wheels.
The system utilizes the buttons already present within your vehicle (such as those on your steering wheel or door panels, or on your center console) to allow you to make an exclusive and customizable disarm sequence that can be up to 20 press long. It must be entered prior to when your vehicle will start. Anyone with your unique pin code is able to enter it - meaning your family members, your colleagues, or friends can utilize it.